AT&T MERLIN LEGEND System Reference Manual page 582

General Telephone Programming Instructions
Programming MLX
Display telephone Using
the Display
Step
1. Label the button to
be programmed
Note: Skip this step
if the feature does
not get programmed
onto a button.
2. Begin programming
3. Identify the button to
be programmed
To delete the feature
currently
programmed on the
button
To continue
programming
Continued
Action
Remove the clear label cover from the
telephone by pulling upon the tab that extends
from the top of the cover.
Write the feature name on the card next to the
button to be programmed.
Replace the cover.
Press Menu.
Select Ext Program [Prog] from the
display.
Select Start from the display.
Press the button you labeled.
Note: If the feature does not get programmed
onto a button, press any line button. This does
not affect the button in anyway.
The display identifies the feature currently
programmed on the button. If no feature is
programmed, the display indicates that the button is
Blank.
Select Delete [Dlete] from the display.
The
button is now blank.
Press the button you labeled again to continue
programming.
Note: If the currently programmed feature was
not deleted from the button, the new feature
programmed onto it will replace it.
Select List Feature [List] from the
display.
The screen lists feature names.
General Telephone Programming Instructions B-3