AT&T MERLIN LEGEND System Reference Manual page 644

Index
Call Management System (CMS), 3-13 — 3-16
capacities, 3-2
Integrated Solution II (IS II), 3-17 — 3-24
MERLIN Attendant, 3-25 — 3-27
MERLIN MAIL Voice Messaging System, 3-28 — 3-33
overview, 1-3
System programming & Maintenance (SPM)-DOS, 3-34
Area code tables for ARS, 2-41
ARS, 2-41 — 2-49
1 + 7 tables, 2-41
6-digit tables, 2-41
absorb digits, 2-43
area code tables, 2-41
default local table, 2-42
default toll table, 2-42
dial zero table, 2-42
Facility Restriction Level (FRL), 2-42
how ARS works, 2-43
local exchange tables, 2-41
other digits, 2-43
process, flowchart, 2-44
special number or N11 table, 2-42
subpatterns, 2-42
system capacities for, 6-2
system programming reports for, F-14
ASN services, 4-26
AT&T INFO2 automatic number identification (ANI) service,
4-29
and Inspect, 2-209
and labeling, 2-212
and SMDR, 2-343
AT&T Switched Network (ASN) services, 4-28
Audible, Transfer, 2-372
AUDIX Voice Power-Is II (AVP), 3-17
Auto Answer All
as a data feature, 1-16
on analog multiline telephones, 2-25 — 2-27
Auto Answer, Headset 2-196
button on QCC, 2-288
Auto Answer Intercom on analog multiline telephones,
2-28, 2-29
Auto Dial, 2-30 — 2-35
Auto Login group type for Group calling, 2-186
Automated Attendant with MERLIN MAIL Voice Messaging
System, 3-28
Automatic Callback, 2-53
or Remote Access, 2-315
Automatic completion for One-Touch Transfer, 2-371
Automatic Extended Call Completion for QCC, 2-292
Automatic Hold, DLC Operator, 2-202
Automatic Hold or Automatic Release for QCC, 2-291
Automatic Line Selection, 2-36 — 2-38
Automatic Maintenance Busy, 2-39, 2-40
Automatic Number Identification (ANI)
with Call Accounting Terminal, 3-10
Automatic Release or Automatic Hold for QCC, 2-291
Automatic Route Selection (ARS), 2-41 — 2-49
1 + 7 tables, 2-41
I N - 2
6-digit tables, 2-41
absorb digits, 2-43
area code tables, 2-41
default local table, 2-2
default toll table, 2-42
dial zero table, 2-42
Facility Restriction Level (FRL), 2-42
how ARS works, 2-43
local exchange tables, 2-41
other digits, 2-43
process, flowchart, 2-44
special number or N11 tables, 2-42
subpatterns, 2-42
system capacities for, 6-2
system programming reports for, F-14
Automatic setting on GPA, 5-23
Automatic signaling type for tie trunks, 4-25
Auxiliary power unit, 5-49
and unit loads, 6-10
Available button for Group Calling, 2-183
AVP, 3-17
B
B8ZS line coding for DS1 facility, 4-30
Backboard for control unit
dimensions, 6-7
mounting hardware, 6-7
Backplane assembly in control unit, 4-1, 5-3
Backup
battery power, 5-5, 5-48
Position Busy for QCC, 2-293
RAM, 5-5
Backup clock synchronization for DS1 facility, 4-31
Barge-in, 2-50 — 2-52
Barrier codes
system capacities for, 6-4
for Remote Access, 2-314
Basic carrier, 5-2
dimensions, 6-6
system capacities for, 6-2
Basic setting on GPA, 5-23
Battery
backup power, 5-48
processor module, 5-5
Behind Switch mode, 4-16 — 4-21
FCC registration, 4-21
features not available, 4-19
host system features, 4-20
line access, 4-19, 4-20
Prime Line buttons, 4-19
types of lines/trunks, 4-17, 4-18