F System Programming Reports - AT&T MERLIN LEGEND System Reference Manual

System Programming Reports
This appendix describes the contents and shows examples of system
programming reports. The reports can be generated by selecting the Print
choice from the System Programming menu. If a PC with SPM is being used, the
reports must be directed to the PC port by selecting "Print-Opts" from the SPM
main menu then selecting "PC port" from the Printer Options screen. When
reports are directed to the PC port, they can be printed on a printer connected
to the PC (hard copy) or as a print file on either a hard disk or floppy disk. To
view a print file, SPM must be exited and DOS commands must be used. If
programming is being done from a remote location, exiting SPM also causes a
disconnect from the control unit modem.
Note: System Programming and Maintenance reports should not be printed
while the system is handling more than 100 calls per hour.
System Programming Reports F-1