AT&T MERLIN LEGEND System Reference Manual page 648

Index
DSS
message status operation, 2-128, 2-129
calling group or CMS supervisor operation, 2-126, 2-127
Extension Status in hotel configuration operation, 2-127,
2-128
feature description, 2-117 — 2-135
hardware description, 5-38, 5-39
normal call handling operation, 2-120 — 2-126
specifications and required interface, 5-44
system capacities for, 6-3
system programming, 2-282
Dual in-line packaging (DIP) switches and tie-trunk signaling,
4-5
E
E&M signaling mode for tie trunks, 4-5
E&M signaling type for tie trunks, 4-5, 4-24
Electrical fields requirement for control unit, 6-6
Electromagnetic interference (EMI) filter, 5-53
Electrostatic discharge (ESD) suppression kits, 5-53
Elevate priority within QCC queue, 2-291
Environmental requirements for control unit, 6-6, 6-7
ESF
framing format for DS1 facility, 4-29
T1 Channel Service Unit (CSU), 4-30, 5-19
Exclusion lists for Night Service, 2-243
Expansion carrier
dimensions, 6-6
in control unit, 5-2
system capacities for, 6-2
Expected digits for DID trunks, 4-26
Extended Call Completion for QCC, 2-292
Automatic, 2-292
Manual, 2-292
Extended superframe framing format for DS1 facility, 4-29
and T1 Channel Service Unit, 4-30
Extension Directory, 2-110
labeling, 2-211
system capacities for, 6-3
system programming reports for, F-15
Extension information, system programming report for, F-18
Extension Pickup, 2-267
Extension programming, 2-280
Extension Status, 2-162 — 2-165
calling group supervisor position, 2-183
Direct Station Selector operation in hotel configuration,
2-127
F
Facility Restriction Level (FRL)
for ARS, 2-42, 2-60
I N - 6
for Remote Access, 2-314
Far-end disconnect. VMI ports, 3-4
Fax
hardware description, 5-41
with Message-Waiting receiver, system capacities for,
6-3
Fax, specifications and required interface, 5-45
Fax Transfer
with Integrated Solution II (IS II), 3-18
with MERLIN MAIL Voice Messaging System, 3-29
FCC (Federal Communications Commission) registration
Behind Switch mode, 4-21
Hybrid/PBX mode, 4-15
Key mode, 4-10
Feature codes, general instructions for using, C-2
Features
data communication, 1-16
general instructions for programming, B-1 — B-4
general instructions for using, C-1 — C-3
inventory through Inspect, 2-208
screen on MLX display telephones, 2-142, 2-143
system capacities for, 6-2 — 6-5
table of system, 2-3, 2-4
table of telephone and system operator, 2-6 — 2-15
Follow Me and Forward, 2-170 — 2-180
Forced Account Code Entry, 2-166 — 2-169
Forced Delay option for Call Management System (CMS),
3-13
Forced Release button on QCC, 2-289
Forward and Follow Me, 2-170 — 2-180
Forward, Remote Call. See Forward and Follow Me,
2-170 — 2-180
Framing format for DS1 facility, D4, 4-29
extended superframe (ESF), 4-29
recommended, 4-32
FRL
for ARS, 2-42
for Remote Access, 2-314
Functional units of control unit, 4-1 — 4-3
G
General mailbox options with Integrated Solution II (IS II),
3-18
General Pickup, 2-267
General Purpose Adapter (GPA), 5-22, 5-23
and Auto Answer All, 2-25
Generic VMI group type for Group Calling, 2-186