Announcement check box and use the drop-down list to select the 30-
Port IP board.
5.
Restart AltiGen Switching Service.
Setting Greeting and Update Prompts
To play a prompt before placing the caller into a hold queue:
1.
Select the Play Prompt Before... checkbox.
2.
Use the drop-down list to select the prompt number you want to use for
the greeting message. (Creating prompts is discussed in previous
sections.)
To play an update prompt every thirty seconds:
1.
Select the Play Update Prompt ... checkbox.
2.
Use the drop-down list to select the prompt number you want to use for
the greeting message.
Configuring Overhead Paging
To configure overhead paging:
1.
Connect overhead paging equipment to a Quantum board audio out
jack or Triton Analog Station board audio in jack.
2.
Access the Audio Peripheral Configuration window and select Enable
Overhead Paging.
3.
Use the drop-down list to select the Quantum or Triton Analog Station
board to which the overhead paging is attached.
AltiWare OE System Installation & Administration Manual
Additional Setup
11-3