Table of Contents
Advertisement
Changing TAPI Configuration Parameters
To change TAPI Configuration Parameters:
1.
On Windows NT, select Start > Settings > Control Panel >
Telephony.
On Windows 2000, select to Start > Settings > Control Panel >
Phone and Modem Options.
2.
On Windows NT, click on the Telephony Drivers tab.
On Windows 2000, click on the Advanced tab.
3.
Choose AltiGen (TM) Communications Service Provider and click
Configure.
4.
In the AltiGen TAPI Device Detect dialog box, click Configure.
5.
In the AltiGen TAPI Configuration dialog box, click Extension.
6.
Enter the extension number and password of the entry you want to
change and click Remove.
7.
Enter the extension number and password of an entry to add with new
values and click Add.
AltiWare OE System Installation & Administration Manual
Using TAPI
15-3
Advertisement
Table of Contents
Troubleshooting
