Table of Contents
Advertisement
Setting Up Email Service
AltiWare provides users with the ability to record a voice annotation and
attach it to an email mixed-media message. This voice recording must be
done before the user sends the email in order to send the voice annotation
as an attachment to the email. After the voice recording is complete, the
user can send the email. AltiWare then combines the voice message and the
email into a single MIME message and sends it to the recipient. The ability
to send and receive MIME messages is included as part of AltiWare email
capabilities.
Setting Up Email Service
There are some basic requirements that must be met in order to access
Mixed-Media Messaging using email over the AltiServ system.
Before You Begin
To set up email for the AltiServ system, you need to have the following
installed on the AltiServ:
• Windows NT network interface card installed and Windows NT
network capability enabled
• Network TCP/IP installed and configured
• Internet connection (if sending and receiving emails over the
internet)
• Multi-media stations/PCs as clients
Setting Up LAN and Internet Email on the Server
To set up the server side of the network, follow the steps below:
Step 1: Selecting Your ISP and IP Addresses
You will need to obtain the following to setup Internet email:
1.
Select your Internet Service Provider (ISP). There are numerous
ISPs to choose from. There is a fee associated with these services. For
details, please contact an ISP that serves your area.
2.
From your ISP:
•
Obtain a Domain Name Server (DNS) Address. AltiServ address
should be added to the DNS database by your ISP.
14-4 AltiWare OE System Installation & Administration Manual
Advertisement
Table of Contents
Troubleshooting
