Altigen AltiWare OE Version 4.6 Administration Manual page 45

Table of Contents

Advertisement

Direct Inward Dial (DID) - allows an incoming trunk call to directly
access an extension without Attendant intervention.
Note: If your local exchange carrier provides DID service, DID calls
will automatically be steered to the appropriate destination.
Distinctive Call Waiting Tone - allows three different call waiting
tone cadences to distinguish between internal, external, and operator
calls.
Distinctive Ringing - allows three different ringing cadences to
distinguish between internal, external, and operator calls.
Do Not Disturb - blocks all calls coming into a specific extension and
sends them to preprogrammed destinations such as voice mail or the
operator.
Feature Tips - plays helpful tips and reminders for optimal use of
AltiServ.
FSK-based Message Waiting - allows message waiting that is based
on FSK (Frequency Shift Keying), a modulation technique for data
transmission. Tone or voltage-based message waiting options can also
be selected. Phones with FSK-based message waiting indicator are
highly recommended.
Hands Free Intercom Mode - by pressing #81 on their speaker
phone, users can receive calls without having to pickup the handset to
answer. Hands Free Manual Answer Mode, #82, allows another
version of this function.
Hop Off Calls over T1/PRI Tie Trunks - multiple AltiServ systems
at the same or remote locations can be linked through a T1/PRI
network. Also, this feature provides toll savings on long distance calls
by allowing users to dial a remote AltiServ system via a T1/PRI trunk
and then the destination phone number through PSTN.
Individual and System Call Pick Up - allows users to answer a
ringing telephone from another station.
Intercom Call - by pressing #93 on any phone connected to an
AltiWare system, users can make an intercom call to an AltiTouch
Plus or Alti-IP 600 phone. If the phone is in idle state, the phone
speaker will be turned on, and the voice path is connected. If the IP
phone is busy, the call will follow the busy call handling feature of the
IP phone's configuration.
AltiWare OE System Installation & Administration Manual
Overview
1-11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Altiware oe 4.6

Table of Contents