Altigen AltiWare OE Version 4.6 Administration Manual page 174

Defining an IP Dialing Table
Define the attributes for the entry:
Parameter
Location ID
Location Name
Server IP Address
Remote Ext. Length
5-30 AltiWare OE System Installation & Administration Manual
Description
A unique dialing number to connect to the remote
location. The length of the number is of course the
Location ID Digit Length described in "About the
Location ID Digit Length" on page 5-28.
A descriptive name of up to 15 characters to identify
the location. This name may be used by Caller ID.
The remote server's address in one of the following
formats:
• RFC assigned IP address (e.g. 100.100.100.100).
IP addresses with prefixes of 10.0.0.0/8,
172.16.0.0/12 or 192.168.0.0/16 can only be used
within private networks (Intranets).
• Fully qualified DNS name (e.g.,
newyork.altigen.com), of up to 64 characters.
This IP address format is recommended over DNS
names, since with the IP address, the application does
not need to resolve the name.
The length of extension digits at the remote location.
Valid entries are None - 7, with "None" meaning not
specified. Specifying the remote extension length is
optional but highly recommended, since this
information tells the system how long to wait for
another entry before outpulsing (sending the digits).