Altigen AltiWare OE Version 4.6 Administration Manual page 42

Key AltiServ Characteristics
Triton T1/E1/PRI Trunk Board - a PCI telephony card
NEW
that supports either T1, E1 or PRI digital trunks through
software configuration.
• 5V PCI slot is required for each Triton board.
• Additional T1/PRI boards can be added to meet larger system
requirements. The maximum number of T1/PRI boards in one
system is up to eight (8) T1/PRI lines (192 digital trunks).
• The maximum number of T1/E1/PRI boards in one system is up
to eight (8) T1/E1/PRI lines.
• Tone detection (fax, modem, voice) available for predictive
dialing integration.
— Triton Analog Station Board - a PCI bus telephony board that
supports 12 analog extensions per board.
• Provides adaptive balance and selectable impedance
• Analog and digital loop back test modes
• Tip and ring reversal
• FSK message lamp
• 5V PCI slot is required for each Triton Analog Station Board.
— Triton Analog Trunk Board - a long form factor PCI telephony
card that supports 12 trunks, available in two models: loop start/
ground start (LS/GS) and loop start (LS). Both models have the
same features regarding LS. The LS/GS board is required when
ground start trunks may be required. You can install up to 16 Triton
Analog Trunk boards per system.
• Tone detection (fax, modem, voice) available for predictive
dialing integration.
— Triton Resource Board - a PCI bus telephony board that provides
monitoring and Barge In system support functions. You can install
up to two (2) Resource Boards per system.
• AltiWare System Software - the AltiServ system telephony
application software that provides an easy-to-use graphical user
interface. It lets you configure, administer, and maintain the AltiServ
system, and can be used as a platform for third-party enhanced
application development. AltiWare software components such as
Switching Service, Messaging Agent, SMTP Server, POP3 Server,
1-8 AltiWare OE System Installation & Administration Manual