Altigen AltiWare OE Version 4.6 Administration Manual page 188

Configuring the Triton Analog Trunk LS/GS and LS Boards
Double click the board's icon in the Boards window (see Figure 1) to open
the Board Configuration window.
Figure 5. Board Configuration window (Triton Analog Trunk)
The Board Configuration window contains the following attributes:
Parameter
Board Info Group
Channel Mapping
List Group
Span Info
6-6 AltiWare OE System Installation & Administration Manual
Description
Board Logical ID: assigned by AltiServ.
Board Name: the type of board installed in the
system and board ID.
Note: This is informational only and cannot be
edited.
Shows the board Logical Channel, Physical Span,
and Physical Channel.
To reinitialize channels, select the channel to reset
and click the Reset Channel button, then click OK.
Note: This is informational only and cannot be
edited.
Note: Double clicking a channel in this window
invokes a channel configuration window. See
"Triton Analog Trunk Properties" on page 7-
9.
Not available for Triton Analog Trunk LS/GS and
LS boards.