Altigen AltiWare OE Version 4.6 Administration Manual page 272

Setting up Groups
For workgroups, the Group window appears as follows:
Figure 10. Workgroup View of Group Window, Extension Configuration
Adding or Removing Members
To add extension(s) to the selected group:
1. In the Group view of the group window, click the extension number(s)
in the Not Member list.
2. Click Add to move them to the Member list.
Note: If the group pilot extension is configured to Ring All Available
Members, the maximum number of members is 20. See
"Setting Huntgroup Handling" or "Setting Workgroup
Handling" for details.
To remove extension(s) from a group:
1. Click the extension number(s) in the Member list.
2. Click Remove to move them to the Not Member list.
8-24 AltiWare OE System Installation & Administration Manual