PCI slot 1
PCI slot 2
PCI slot 3
PCI slot 4
PCI slot 5
Adapter considerations
Before you install adapters, read the following:
v Review the documentation that comes with the adapter, and follow those
v You can install full-length adapters in all five PCI expansion slots.
v The computer supports 5.0V and 3.3V PCI adapters. The 32-bit adapter slots
Note: The computer power supply might not be able to support the installation of
Installing an adapter
Attention:
damage from static electricity. For details on handling these devices, refer to
"Handling static-sensitive devices" on page 43.
To install an adapter, complete the following steps:
50
Hardware Maintenance Manual: IBM IntelliStation M Pro Type 6233 and 6850
instructions in addition to the instructions given in this chapter.
support 5.0V PCI adapters and the 64-bit slots support 3.3V adapters.
an adapter in all PCI slots. The ability of the power supply to support an
adapter in all slots is dependent on the computer configuration and the type
of PCI adapter installed.
When you handle static-sensitive devices, take precautions to avoid
1. Review the "Safety information" on page 103.
2. Turn off the computer and peripheral devices.
3. Remove all external cables from the computer; then remove the cover. For
more information, see "Removing the cover and front bezel" on page 47.
4. Determine which PCI expansion slot you will use for the adapter.
5. If you are installing a full-sized adapter in one of the PCI slots on the system
board, rotate the PCI support bracket out of your way.
AGP Pro connector