Ibm Setup Utility Main Menu Choices - IBM INTELLISTATION E PRO 6204 User Manual

IBM Setup Utility main menu choices

The IBM Setup Utility main menu appears at the top of the IBM Setup Utility program
screen. Using the items of this menu, you can select settings that you want to
change. Item specific Help information for each menu item appears on the right hand
side of the IBM Setup Utility program screen. Select the item to view this information.
The choices on some menus might differ slightly, depending on the BIOS version on
your computer.
F1
Esc
The following sections provide descriptions of the main menu choices.
Main
This choice is automatically selected when the IBM Setup Utility program starts.
Here, you can view general information about your computer, such as a summary of
components and computer configuration.
The type and speed of the microprocessor, the amount of memory that is installed, the
machine type and model number, the computer serial number, and the revision level
or issue date of the BIOS code that is stored in the flash electronically erasable
programmable ROM (EEPROM), appears under System Summary on this menu
choice. You can also view the language that your computer is set to display.
Changes that you make to configuration settings appear on this summary screen. You
cannot edit the fields of the configuration and system information, but you can set the
system date and time. The system time is in a 24-hour format: hour:minute:second.
Devices
Select this choice to view or change the assignments for devices and input/output
ports.
PS/2 Mouse: Select this choice to set whether a PS/2 pointing device is installed.
Diskette Drive A: Select this choice to set the type of diskette drive installed in your
computer. You can disable the diskette drive, or you can enable various types of
diskette drives.
Serial Port Setup: Select this choice to configure your computer serial ports. If the
port is set to Enabled, you can set the base input/output (I/O) address and the
interrupt. If the port is set to Automatic, the operating system automatically configures
these settings.
28
IBM® IntelliStation® E Pro: User's Guide
IBM Setup Utility
Main Devices Startup
System Summary
Product Data:
MachineType/Model
Flash EEPROM Revision Level
Boot Block Revision Level
System Board Identifier
System Serial Number
BIOS Date (MM/DD/YY)
System UUID
System Time (HH:MM:SS)
System Date (MM/DD/YY)
Language:
Help Select Item -/+
Exit Select Menu Enter
Advanced Security Power
Item Specific Help
Select this option to
ASOK999
view a summary of the
20KT05AUS
system hardware
2005A
configuration
SYSTEMBOARD
1234567
06/27/01
[09:44:40]
[07/02/2001]
[English (US)]
Change Values F9 Setup Defaults
Select Sub-Menu F10 Save and Exit
Exit