Configuration Rules And Guidelines; General Configuration Rules; Hp Continuous Access Eva 3 Site Configuration With Six Mpx200 Router Full Peer-To-Peer - HP StorageWorks 6400/8400 - Enterprise Virtual Array User Manual
Hp storageworks mpx200 multifunction router user guide (5697-0202, february 2010)
Hide thumbs
Also See for StorageWorks 6400/8400 - Enterprise Virtual Array:
- User manual (150 pages) ,
- Software manual (86 pages) ,
- Reference manual (48 pages)
Table of Contents
Advertisement
Figure 82 HP Continuous Access EVA 3 site configuration with six MPX200 router full peer-to-peer
connectivity
.
Configuration rules and guidelines
This section defines the configuration rules for using the MPX200 Multifunction Router.
General configuration rules
The following general configuration rules apply:
•
All MPX200 configurations require a minimum of two gateways. These can be two MPX200s or
one MPX200 and one IP Distance Gateway (mpx110), one local and one remote, connected
through an IP network. HP does not support FCIP connectivity between other gateway models.
•
FCIP is supported on GbE ports only (GE1, GE2).
•
The MPX200 Multifunction Router is supported for FCIP extension with HP Continuous Access EVA
(see
EVA storage system rules and
NOTE:
For current support, see SPOCK at http://www.hp.com/storage/spock. You must sign up for an HP
Passport to enable access.
guidelines, page 126).
MPX200 Multifunction Router
125
Advertisement
Table of Contents
Troubleshooting
