Specifications; Accessories - Cisco IPS-4255-K9 - Intrusion Protection Sys 4255 Installation Manual

Chapter 3 Installing the IPS 4260

Specifications

Table 3-4
Table 3-4
Dimensions and Weight
Height
Width
Depth
Weight
Form factor
Power
Autoswitching
Frequency
Operating current
Steady state
Maximum peak
Maximum heat dissipation
Environment
Temperature
Relative humidity
Altitude
Shock
Vibration

Accessories

The IPS 4260 accessories kit contains the following:
•
•
•
•
•
OL-18504-01
lists the specifications for the IPS 4260.
IPS 4260 Specifications
3.45 in. (87.6 cm)
17.14 in. (435.3 cm)
20 in. (508 cm)
20.0 lb (9.07 kg)
2 RU, standard 19-inch rack-mountable
100V to 240V AC
47 to 63 Hz, single phase
8.9 A
588 W max continuous
657 W
648 BTU/hr
Operating +32°F to +104°F (+0°C to +40°C)
Nonoperating -104°F to +158°F (-40°C to +70°C)
Operating 10% to 85% (noncondensing)
Nonoperating 5% to 95% (noncondensing)
Operating 0 to 9843 ft (3000 m)
Nonoperating 0 to 15,000 ft (4750 m)
Operating Half-sine 2 G, 11 ms pulse, 100 pulses
Nonoperating 25 G, 170 inches/sec delta V
2.2 Grms, 10 minutes per axis on all three axes
DB25 connector
DB9 connector
Rack mounting kit—screws, washers, and metal bracket
RJ45 console cable
Two 6-ft Ethernet cables
Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.0

Specifications

3-9