Installing The Ips 4270-20 System Image - Cisco IPS-4255-K9 - Intrusion Protection Sys 4255 Installation Manual

Installing System Images
UNIX Example
rommon> file /system_images/IPS 4260-K9-sys-1.1-a-7.0-1-E3.img
Note
Windows example
rommon> file <tftpboot_directory>IPS 4260-K9-sys-1.1-a-7.0-1-E3.img
Download and install the system image.
Step 10
rommon> tftp
Note
For More Information
•
•

Installing the IPS 4270-20 System Image

You can install the IPS 4270-20 system image by using the ROMMON on the appliance to TFTP the
system image onto the compact flash device.
To install the IPS 4270-20 system image, follow these steps:
Step 1 Download the IPS 4270-20 system image file (IPS-4270_20-K9-sys-1.1-a-7.0-1-E3.img) to the tftp root
directory of a TFTP server that is accessible from your IPS 4270-20.
Note
Boot the IPS 4270-20.
Step 2
Booting system, please wait...
Cisco Systems ROMMON Version (1.0(12)10) #7: Thu Jun 21 13:50:04 CDT 2007
ft_id_update: Invalid ID-PROM Controller Type (0x5df)
ft_id_update: Defaulting to Controller Type (0x5c2)
Note
Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.0
12-20
The path is relative to the default tftpboot directory of the UNIX TFTP server. Images located
in the default tftpboot directory do not have any directory names or slashes in the file location.
The IPS 4260 reboots once during the reimaging process. Do not remove power from the
IPS 4260 during the update process or the upgrade can become corrupted.
For a list of supported TFTP servers, see
For the procedure for locating software on Cisco.com, see
Make sure you can access the TFTP server location from the network connected to the Ethernet
port of your IPS 4270-20.
The controller type errors are a known issue and can be disregarded.
Chapter 12 Upgrading, Downgrading, and Installing System Images
Supported TFTP Servers, page
Obtaining Cisco IPS Software, page
12-14.
11-1.
OL-18504-01