Specifications; Installing The Aip Ssm - Cisco IPS-4255-K9 - Intrusion Protection Sys 4255 Installation Manual

Installing the AIP SSM

All IPS platforms allow ten concurrent CLI sessions.
Note
This chapter describes how to install the AIP SSM. It contains the following sections:
•
•
•
•
•

Specifications

Table 6-1
Table 6-1
Specification
Dimensions (H x W x D)
Weight
Operating temperature
Nonoperating temperature
Humidity
1. 2.70 lb for 45 c heatsink, approximately 3.00 lb for the 55c maximum
OL-18504-01
Specifications, page 6-1
Memory Specifications, page 6-2
Hardware and Software Requirements, page 6-2
Indicators, page 6-2
Installation and Removal Instructions, page 6-3
lists the specifications for the AIP SSM:
AIP SSM Specifications
Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.0
C H A P T E R
Description
1.70 x 6.80 x 11.00 inches
Minimum: 2.50 lb
1
Maximum: 3.00 lb
+32° to +104°F (+0° to +40°C)
–40° to +167°F (–40° to +75°C)
10% to 90%, noncondensing
6
6-1