Hardware Specifications; Rack And Cabinet Mounting Options; Firepower 7000 Series Devices; Firepower 7010, 7020, 7030, And 7050 - Cisco 7010 Installation Manual

Hardware Specifications

Firepower 7000 and 8000 Series devices are delivered on a variety of platforms to meet the needs of your
organization.

Rack and Cabinet Mounting Options

You can mount Firepower devices in racks and server cabinets. The appliance comes with a
rack-mounting kit except for the Firepower 7010, 7020, 7030, and 7050. For information on mounting
the appliance in a rack, refer to the instructions delivered with the rack-mounting kit.
The Firepower 7010, 7020, 7030, and 7050 require a tray and rack-mounting kit, available separately.
You can purchase rack and cabinet mounting kits for other appliances separately.

Firepower 7000 Series Devices

All Firepower 7000 Series devices have an LCD panel on the front of the appliance where you can view
and, if enabled, configure your appliance. See the following sections for information:
•
•
•

Firepower 7010, 7020, 7030, and 7050

The Firepower 7010, 7020, 7030, and 7050 devices, also called the 70xx Family, are 1U appliances,
one-half the width of the rack tray and delivered with eight copper interfaces, each with configurable
bypass capability. See the Regulatory Compliance and Safety Information for FirePOWER and
FireSIGHT Appliances document for safety considerations for Firepower 70xx Family appliances.
See the following sections for more information:
•
•
•
Firepower 7010, 7020, 7030, and 7050, page 7-1
Firepower 7110 and 7120, page 7-6
Firepower 7115, 7125, and AMP7150, page 7-13
Firepower 70xx Family Front View, page 7-2
Firepower 70xx Family Rear View, page 7-5
Firepower 70xx Family Physical and Environmental Parameters, page 7-5
C H A P T E R
Firepower 7000 and 8000 Series Installation Guide
7
7-1