Cisco IPS-4255-K9 - Intrusion Protection Sys 4255 Installation Manual page 75

Chapter 3 Installing the IPS 4260
Table 3-1
Table 3-1
Indicator
ID (blue)
NIC (green)
Power (green)
Flash (green/amber)
Status (green/amber) Blinks green while the power-up diagnostics are running or the system is
Figure 3-5
Figure 3-5
connector
(not supported)
Keyboard
connector
(not supported)
OL-18504-01
describes the front panel indicators on the IPS 4260.
Front Panel Indicators
Description
Continuously lit when activated by the front panel ID switch.
Indicates activity on either the GigabitEthernetO/1 or MGMT interfaces.
When continuously lit, indicates DC power. The indicator is off when power is
turned off or the power source is disrupted.
Off when the compact flash device is not being accessed. Blinks green when the
compact flash device is being accessed. Solid amber when a device has failed.
booting. Solid green when the system has passed power-up diagnostics. Solid
amber when the power-up diagnostics have failed.
shows the back view of the IPS 4260.
IPS 4260 Back Panel Features
Mouse
CONSOLE GE 0/1 MGMT
Management
Console
port 0/0
Gigabit
Ethernet 0/1
(not supported)
Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.0
Sensing interface
6
5
4
USB ports
(not used)
Video
connector
Front and Back Panel Features
Indicator
expansion slots
light
3
2
1
Power
supply 2
Power
connector
Power
supply 1
3-7