Specifications - Cisco IPS-4255-K9 - Intrusion Protection Sys 4255 Installation Manual

Installing the IDSM2
All IPS platforms allow ten concurrent CLI sessions.
Note
This chapter lists the software and hardware requirements of the IDSM2, and describes how to remove
and install it. It contains the following sections:
•
•
•
•
•
•
•
•
•

Specifications

Table 7-1
Table 7-1
Specification
Dimensions (H x W x D)
Weight
Operating temperature
Nonoperating temperature
Humidity
OL-18504-01
Specifications, page 7-1
Software and Hardware Requirements, page 7-2
Minimum Supported the IDSM2 Configurations, page 7-2
Using the TCP Reset Interface, page 7-3
Front Panel Features, page 7-3
Installation and Removal Instructions, page 7-4
Enabling Full Memory Tests, page 7-12
Resetting the IDSM2, page 7-13
Powering the IDSM2 Up and Down, page 7-15
lists the specifications for the IDSM2.
IDSM2 Specifications
Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.0
C H A P T E R
Description
1.18 x 15.51 x 16.34 in. (30 x 394 x 415 mm)
Minimum: 3 lb (1.36 kg)
Maximum: 5 lb (2.27 kg)
+32° to +104°F (+0° to +40°C)
–40° to +167°F (–40° to +75°C)
10% to 90%, noncondensing
7
7-1