Chapter 12
Upgrading, Downgrading, and Installing System Images
•
•
For More Information
For the procedure for obtaining these files on Cisco.com, see
upgrade Command and Options
Use the upgrade source-url command to apply service pack, signature update, engine update, minor
version, major version, or recovery partition file upgrades.
The following options apply:
•
OL-18504-01
System Image Files
IPS 4240-K9-sys-1.1-a-7.0-1-E3.img
–
IPS 4255-K9-sys-1.1-a-7.0-1-E3.img
–
IPS 4260-K9-sys-1.1-a-7.0-1-E3.img
–
IPS-4270_20-K9-sys-1.1-a-7.0-1-E3.img
–
IPS-IDSM2-K9-sys-1.1-a-7.0-1-E3.bin.gz
–
IPS-SSM_10-K9-sys-1.1-a-7.0-1-E3.img
–
IPS-SSM_20-K9-sys-1.1-a-7.0-1-E3.img
–
IPS-SSM_40-K9-sys-1.1-a-7.0-1-E3.img
–
IPS-AIM-K9-sys-1.1-a-7.0-1-E3.img
–
IPS-NME-K9-sys-1.1-a-7.0-1-E3.img
–
Recovery Image Files
–
IPS-K9-r-1.1-a-7.0-1-E3.pkg
–
IPS-AIM-K9-r-1.1-a-7.0-1-E3.pkg
IPS-NME-K9-r-1.1-a-7.0-1-E3.pkg
–
source-url—The location of the source file to be copied.
ftp:—Source URL for an FTP network server. The syntax for this prefix is:
–
ftp:[//[username@] location]/relativeDirectory]/filename
ftp:[//[username@]location]//absoluteDirectory]/filename
You are prompted for a password.
Note
scp:—Source URL for the SCP network server. The syntax for this prefix is:
–
scp:[//[username@] location]/relativeDirectory]/filename
scp:[//[username@] location]//absoluteDirectory]/filename
You are prompted for a password.
Note
–
http:—Source URL for the web server. The syntax for this prefix is:
http:[[//username@] location]/directory] filename
Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.0
Upgrading the Sensor
Obtaining Cisco IPS Software, page 11-1.
12-3