Verifying Initialization - Cisco IPS-4255-K9 - Intrusion Protection Sys 4255 Installation Manual

Verifying Initialization

Verifying Initialization
To verify that you initialized your sensor, follow these steps:
Step 1 Log in to the sensor.
Step 2 View your configuration.
sensor# show configuration
! ------------------------------
! Current configuration last modified Mon Feb 09 12:03:44 2009
! ------------------------------
! Version 7.0(1)
! Host:
!
! Signature Definition:
!
!
! ------------------------------
service interface
exit
! ------------------------------
service authentication
exit
! ------------------------------
service event-action-rules rules0
exit
! ------------------------------
service host
network-settings
host-ip 172.23.204.84/24,172.23.204.1
host-name sensor
telnet-option enabled
access-list 0.0.0.0/0
dns-primary-server enabled
address 1.1.1.1
exit
dns-secondary-server enabled
address 2.2.2.2
exit
http-proxy proxy-server
address 1.1.1.1
port 1
exit
exit
time-zone-settings
offset -480
standard-time-zone-name PST
exit
exit
! ------------------------------
service logger
exit
! ------------------------------
service network-access
exit
! ------------------------------
service notification
exit
! ------------------------------
service signature-definition sig0
exit
Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.0
10-28
Realm Keys key1.0
Signature Update S365.0
Virus Update V1.4
2008-10-31
2007-03-02
Chapter 10 Initializing the Sensor
OL-18504-01