Specifications - Cisco IPS-4255-K9 - Intrusion Protection Sys 4255 Installation Manual

Installing the AIM IPS
All IPS platforms allow ten concurrent CLI sessions.
Note
This chapter describes how to install the AIM IPS. It contains the following sections:
•
•
•
•
•
•
•
•

Specifications

Table 5-1
Table 5-1
Specification
Dimensions (H x W x D)
Weight
Operating temperature
Nonoperating temperature
Humidity
Operating altitude
Memory
eUSB
OL-18504-01
Specifications, page 5-1
Before Installing the AIM IPS, page 5-2
Software and Hardware Requirements, page 5-2
Interoperability With Other IPS Modules, page 5-3
Restrictions, page 5-3
Hardware Interfaces, page 5-4
Installation and Removal Instructions, page 5-5
Verifying Installation, page 5-6
lists the specifications for the AIM IPS.
AIM IPS Specifications
Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.0
C H A P T E R
Description
0.85 x 3.25 x 5.25 in. (2.16 x 8.26 x 13.34 cm)
4 oz (113.41 cg) (maximum)
+32° to +104°F (+0° to +40°C)
-40° to +185°F (-40° to +85°C)
5% to 95% noncondensing
0 to 10,000 ft (0 to 3,000 m)
1 GB
512 MB
5
5-1