Cisco IPS-4255-K9 - Intrusion Protection Sys 4255 Installation Manual page 270

Installing System Images
Fri Mar 11 21:22:19 2005 : Partition '/dev/hdc1' mounted.
Fri Mar 11 21:22:19 2005 : Finished initializing the hard disk.
Fri Mar 11 21:22:19 2005 : Applying the image, this process may take several minutes...
Fri Mar 11 21:22:19 2005 : Directory changed to '/mnt/hd'.
Fri Mar 11 21:22:20 2005 : Performing post install, please wait...
Fri Mar 11 21:22:20 2005 : File /mnt/hd/post-install copied to /tmp/post-install.
Fri Mar 11 21:22:20 2005 : Directory changed to '/tmp'.
Fri Mar 11 21:22:28 2005 : Partition '/dev/hdc1' unmounted.
Fri Mar 11 21:22:28 2005 : Directory changed to '/tmp'.
Application image upgrade complete. You can boot the image now.
Partition upgraded successfully
guest@idsm2.localdomain#
Clear the upgrade log.
Step 15
guest@idsm2.localdomain# clear log upgrade
Cleared log file successfully
Display the upgrade log.
Step 16
guest@idsm2.localdomain# show log upgrade
guest@idsm2.localdomain#
Step 17 Ping another computer.
guest@idsm2.localdomain# ping 10.89.146.114
PING 10.89.146.114 (10.89.146.114) from 10.89.149.74 : 56(84) bytes of data.
64 bytes from 10.89.146.114: icmp_seq=0 ttl=254 time=381 usec
64 bytes from 10.89.146.114: icmp_seq=1 ttl=254 time=133 usec
64 bytes from 10.89.146.114: icmp_seq=2 ttl=254 time=129 usec
64 bytes from 10.89.146.114: icmp_seq=3 ttl=254 time=141 usec
64 bytes from 10.89.146.114: icmp_seq=4 ttl=254 time=127 usec
--- 10.89.146.114 ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max/mdev = 0.127/0.182/0.381/0.099 ms
guest@idsm2.localdomain#
Reset the IDSM2.
Step 18
Note
guest@idsm2.localdomain# reset
guest@idsm2.localdomain#
2005 Mar 11 21:55:46 CST -06:00 %SYS-4-MOD_SHUTDOWNSTART:Module 9 shutdown in progress. Do
not remove module until shutdown completes
Broadcast message from root Fri Mar 11 21:55:47 2005...
The system is going down for system halt NOW !!
console> (enable)#
For More Information
For a list of supported FTP and HTTP/HTTPS servers, see
page
Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.0
12-34
You cannot specify a partition when issuing the reset command from the maintenance partition.
The IDSM2 boots to whichever partition is specified in the boot device variable. If the boot
device variable is blank, the IDSM2 boots to the application partition.
12-2.
Chapter 12 Upgrading, Downgrading, and Installing System Images
Supported FTP and HTTP/HTTPS Servers,
OL-18504-01