Cisco IPS-4255-K9 - Intrusion Protection Sys 4255 Installation Manual page 66

Installing the IPS 4240-DC
Strip the ends of the wires for insertion into the power connect lugs on the IPS 4240-DC.
Step 8
1
2
Insert the ground wire into the connector for the earth ground and tighten the screw on the connector.
Step 9
Using the same method as for the ground wire, connect the negative wire and then the positive wire.
1
2
1 Negative
2 Positive
3
Ground
4 On/Off Switch
Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.0
2-12
–
+
3
4
–
+
3
4
5 Negative
6 Positive
7
Ground
Chapter 2 Installing the IPS 4240 and the IPS 4255
7
6
5
–
+
OL-18504-01