Cisco IPS-4255-K9 - Intrusion Protection Sys 4255 Installation Manual page 317

Chapter A Troubleshooting
Platform:
Serial Number:
Licensed, expires:
Sensor up-time is 3 days.
Using 1888964608 out of 4029321216 bytes of available memory (46% usage)
system is using 16.5M out of 38.5M bytes of available disk space (43% usage)
application-data is using 44.4M out of 166.8M bytes of available disk space (28%
usage)
boot is using 40.6M out of 69.5M bytes of available disk space (62% usage)
application-log is using 494.0M out of 513.0M bytes of available disk space (96%
usage)
MainApp
:25-0500
AnalysisEngine
:25-0500
CollaborationApp
:25-0500
CLI
:25-0500
Upgrade History:
IPS-K9-7.0-1-E3
Recovery Partition Version 1.1 - 7.0(1)E3
Host Certificate Valid from: 16-Apr-2009 to 17-Apr-2011
sensor#
Step 3 If MainApp displays
For More Information
For more information on IPS system architecture, refer to
Verifying ARC Connections are Active
If the State is not
the statistics, follow these steps:
Log in to the CLI.
Step 1
Verify that ARC is connecting.
Step 2
Check the State section of the output to verify that all devices are connecting.
sensor# show statistics network-access
Current Configuration
LogAllBlockEventsAndSensors = true
EnableNvramWrite = false
EnableAclLogging = false
AllowSensorBlock = false
BlockMaxEntries = 250
MaxDeviceInterfaces = 250
NetDevice
OL-18504-01
IPS4270-20-K9
USE716N39B
01-May-2009 UTC
B-BEAU_2009_APR_18_08_00_7_0_1
Running
B-BEAU_2009_APR_18_08_00_7_0_1
Running
B-BEAU_2009_APR_18_08_00_7_0_1
Running
B-BEAU_2009_APR_18_08_00_7_0_1
08:00:00 UTC Sat Apr 18 2009
Not Running
in the ARC statistics, there is a problem. To verify that the State is Active in
Active
Type = Cisco
Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.0
(Release)
(Release)
(Release)
(Release)
, ARC has failed. Contact the TAC.
System Architecture.
Troubleshooting the Appliance
2009-04-18T08:05
2009-04-18T08:05
2009-04-18T08:05
2009-04-18T08:05
A-39