Cisco IPS-4255-K9 - Intrusion Protection Sys 4255 Installation Manual page 13

Preface
Revised: April 4, 2012, OL-18504-01
Contents
This guide describes how to install appliances and modules that support Cisco IPS 7.0. It includes a
glossary that contains expanded acronyms and pertinent IPS terms. It is part of the documentation set
for Cisco Intrusion Prevention System 7.0. Use this guide in conjunction with the documents listed in
Related Documentation, page
•
•
•
•
•
•
Audience
This guide is for experienced network security administrators who install and maintain Cisco IPS
sensors, including the supported IPS appliances and modules.
Comply with Local and National Electrical Codes
Installation of the equipment must comply with local and national electrical codes. Statement 1074
Warning
Waarschuwing Bij installatie van de apparatuur moet worden voldaan aan de lokale en nationale
elektriciteitsvoorschriften.
Varoitus Laitteisto tulee asentaa paikallisten ja kansallisten sähkömääräysten mukaisesti.
OL-18504-01
xvi. This preface contains the following sections:
Audience, page xiii
Comply with Local and National Electrical Codes, page xiii
Organization, page xv
Conventions, page xv
Related Documentation, page xvi
Obtaining Documentation and Submitting a Service Request, page xvii
Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.0
xiii