Bake - Thermador PRD486EDPG Care And Use Manual

Section Five: USING THE COOKTOP
Setting Bake / Convection Bake
0 O COO O
®®® ® 0®0®
BAKE/CONVECTION BAKE
These cooking modes are for baking,
roasting or warming using one, two or
three racks.
OVEN CONTROL KNOBS (30"
Models)
OVEN
_ HEATING
NOTE: When the oven is turned on, the
cooling blower will turn on automatically.
This is normal. When the oven is turned
off, the cooling blower remains on until
the oven temperature cools to 325°F. The
cooling blower will also operate during
Broil and during the Self-Cleaning cycle.
If the blower is not running during
these modes, do not usethe oven. Call
a qualified appliance technician to repair
the unit.
SECONDARY OVEN
CONTROL KNOBS (48" Models)
ON
OVEN tIGHT 0
OVEN •
HF_TING
OFF
WARM • • • BAKE
pROOF •@0 IIRO,L
OF_ _
To Set the ELECTRIC Oven
1. Select BAKE or CONVECTION BAKE using the
Selector switch.
2. Set Temperature using the Oven Control Knob.
• If using CONVECTION BAKE, set the oven control
knob 25 ° below temperature suggested in recipe. No
changes in temperature if roasting meats or poultry.
• The convection fan turns on six minutes after the
oven is turned on, if CONVECTION BAKE is
selected.
• The OVEN and HEATING lights turn on.
• The temperature indicator will start to rotate toward
the temperature setting.
• The HEATING light cycles off and on during the
cooking process. The oven is preheated when the
HEATING light cycles off the first time.
• Thetemperatureindicatorwillreflectthetemperature
setting.
• The needle of the temperature indicator will move to
the new selected temperature if the temperature
setting is increased or decreased. The gauge isfor
reference only.
• The OVEN indicator light illuminates and remains on
until the OFF Selector switch isturned off or the oven
control knob is turned to the OFF position.
• As the oven cools down, the temperature indicator
will start to decline, reflecting the actual oven
temperature.
To Set the Secondary Oven (48" Models)
1. Select BAKE using Selector switch.
.
Set Temperature using the Oven Control Knob.
• The OVEN indicator light turns on.
• The HEATING light turns on.
• The HEATING light cycles off and on. The oven is
preheated when the HEATING light cycles off the
first time.
• The OVEN indicator light remains on untilthe Selector
switch is turned off.
Note: Temperature indicator is for the main oven only.
24