Xbcp 17 - Allow Control Of File Id - Kyocera DP-1800 Command Reference Manual

XBCP 17 —
Format
Parameter
file-id:
Function
File
allow control of file ID
XBCP 17, 'file-id';
string containing a file ID
A Macro PDF417 symbol contains a required file ID. The XBCP 17 command allows
control of this field. A random file ID is generated when XBCP 10 through 16 or XBCP
18 are executed without executing XBCP 17.
The string must be surrounded by single or double quotation marks, be less than 50
characters long and only contain EXC compaction mode characters (20H~7FH). This
command is ignored if the string does not satisfy these conditions.
The execution of this command automatically sets Macro PDF417 symbol mode. Note
that PDF barcode is positioned a half inch below the previous PDF barcode if there are
no positioning parameters exist [See XBCP 19 (page 387).] or insufficient number of
parameters exist. See the example in File below.
In Macro PDF mode, data such as large as 3000 bytes print 3 90-column-by-30-row PDF
symbols which are a half inch apart vertically:
!R! RES;
XBCP 17,"BookOne";
XBAR; large data such as 3000 bytes;ENDB;
EXIT;
XBCP 17
383