Kyocera DP-1800 Command Reference Manual page 126

PRESCRIBE Command Reference
typeface:
Function
116
typeface as represented by one of the following numbers, followed by a terminator T:
0 = LinePrinterBM8.5-Roman
3 = CourierBM
4 = Swiss721BM
5 = Dutch801BM
6 = LetterGothicBM
8 = PrestigeEliteBM
4099 = Courier
4101 = CG Times
4102 = LetterGothic
4113 = CGOmega
4116 = Coronet
4140 = Clarendon-Cd
4148 = Univers
4168 = AntiqueOlive
4197 = GaramondAntiqua
4297 = Marigold
4362 = Albertus
16602 = Arial
16686 = Symbol
16901 = TimesNewRoman
24579 = CourierPS
24591 = Palatino
24580 = Helvetica
24607 = ITCAvantGardeGothic-Bk
24703 = NewCenturySchoolbook
24623 = ITCBookman
25093 = Times
31402 = Wingdings
45099 = ITCZapfChancery-MdIt
45101 = ITCZapfDingbats
45358 = SymbolPS
The typeface values for option fonts, if installed, can be obtained by printing a font list.
To print a font list, use the FLST command or the control panel keys.
The FSET command can be used to select either bitmap fonts or scalable fonts. It is also
convenient for changing one or several characteristics of the current font, e.g. changing
the upright style to italic. The example at the end of this section demonstrates this
function.
Font selection is made based on the characteristics of the font, the font's location in the
printer, and the font's orientation. In the list below, the characteristics of font are listed in
order of priority, from highest to lowest:
Symbol set
Spacing (pitch)
Point size (height)
Style
Stroke weight
Typeface family
Location
Orientation
Highest Priority Selection
Lowest Priority Selection