Ldfc - Load Font Character - Kyocera DP-1800 Command Reference Manual

LDFC —
Format
Parameters
font-number:
code:
height:
width:
y-offset:
x-offset:
cell-width:
center:
rotation:
resolution:
LoaD Font Character
LDFC font-number, code, height, width, y-offset, x-offset,
cell-width, center, rotation[, resolution]; bit-map;
font number (integer from 1000 to 65535). Same for all characters in the font. Must not
duplicate any resident bitmap font number.
ASCII code of the character (0 to 255)
height of the character bitmap, in dots (integer from 0 to 3999)
width of the character bitmap, in dots (integer from 0 to 3999)
distance from the baseline to the top of the character bitmap, in micro dots [ 1 / 32 dot]
(integer from -32768 to 32767); positive – up, negative – down
distance from the left edge of the character cell to the left edge of the character bitmap, in
micro dots [ 1 / 32 dot] (integer from -32768 to 32767); positive – up, negative – down
total width of the character cell, in micro dots [ 1 / 32 dot] (integer from 0 to 65535). This
parameter is used in proportional spacing.
distance from the left edge of the character cell to center of the character, in micro dots
[ 1 / 32 dot] (integer from 0 to 65535)
0 = portrait
1 = upside-down landscape
2 = upside-down portrait
3 = landscape
resolution of the character, 300 [dpi], 600 [dpi], or 1200 [dpi]
LDFC
147