Xbcp 10 - Enable File Name - Kyocera DP-1800 Command Reference Manual

PRESCRIBE Command Reference
XBCP 10 —
Format
Parameter
file-name:
Function
File
376
enable file name
XBCP 10, 'file-name';
string containing a file name
A Macro PDF417 symbol contains an optional file name field. The XBCP 10 command
enables this field and defines its contents.
The string must be surrounded by single or double quote marks, be less than 200
characters long and only contain EXC mode compaction characters (20H~7FH). This
command is ignored if the string does not satisfy these conditions. The execution of this
command automatically sets Macro PDF417 symbol mode.
!R! RES;
XBCP 10, 'A00254';
MZP 1,0; XBCP 18,0;
XBAR; ...
...
EXIT;