Xbcp 8 - Automatically Set Rows And Columns - Kyocera DP-1800 Command Reference Manual

PRESCRIBE Command Reference
XBCP 8 —
Format
Parameter
Function
374
automatically set rows and columns
XBCP 8;
None
The XBCP 8 command permits the system to automatically set rows and columns so that
it satisfies the requirement that the multiplication of rows times columns is less than or
equal to 928. Default is disabled.
Note that the XBCP 8 overrides XBCP 4 and/or 5 which set the number of rows and
columns. However, this command is not effective if both XBCP 6 and XBCP 4 and/or 5
are issued together. Precedence of XBCP modes is: 4/5<8, 4/5+8<6.