Barc - Draw Barcode - Kyocera DP-1800 Command Reference Manual

PRESCRIBE Command Reference
BARC —
Format
Parameters
type:
34
draw BARCode
BARC type, flag, 'string'[, short, tall [, bar1, bar2, bar3, bar4, space1,
space2, space3, space4]];
There are the following barcode types:
0 = UPC A
1 = UPC A with two-digit supplement
2 = UPC A with five-digit supplement
3 = UPC D-1
4 = UPC D-2
5 = UPC D-3
6 = UPC D-4
7 = UPC D-5
8 = UPC E
9 = UPC E with two-digit supplement
10 = UPC E with five-digit supplement
11 = EAN-8 (Truncated JAN)
12 = EAN-13 (Truncated JAN)
13 = DUN-14 (Distribution Unit Number, EAN)
14 = DUN-16 (Distribution Unit Number, EAN)
15 = MSI with no check digit
16 = MSI with single mod-10 check digit
17 = MSI mod-10 followed by mod-10 check digit
18 = MSI mod-11 followed by mod-10 check digit
19 = CODE 39 with no check digit
20 = CODE 39 with mod-43 check digit
21 = Interleaved two of five with no check digit
22 =Identicon two of five with no checksum
23 = Code 128 (manual mode change)
24 = Code 128 (auto mode change)
25 = Code 11 with only 'c'
26 = Code 11 with both 'c' and 'k' checksum
27 = Code 93 with both 'c' and 'k' checksum
28 = CODABAR with no check digit (narrow gap)
29 = Matrix two of five with no checksum
31 = Industrial two of five with no checksum
32 = Ames with no checksum
33 = Delta distance 'a' (IBM) with no checksum
34 = Delta distance 'a' (IBM) with no checksum
35 = EAN 8 with two-digit supplement
36 = EAN 8 with five-digit supplement
37 = EAN 13 with two-digit supplement
38 = EAN 13 with five-digit supplement
39 = POSTNET
40 = FIM
41 = Interleaved two of five with check digit
42 = UPC/EAN128