Rwer T - [Read/Write External Resource] Set Terminate String - Kyocera DP-1800 Command Reference Manual

RWER T —
Format
Parameter
terminator:
Function
[Read/Write External Resource] set
Terminate string
RWER T[, 'terminator'];
ASCII text string up to 4 bytes, enclosed in either single or double quotation marks
The RWER T command sets a terminator string for external media whether it is a
memory card or the hard disk. This terminator is used when storing binary data to
external media. See the RWER S command page (page 247) for example. WRED is set
as the default terminator if parameter terminator is omitted.
A command error results and the command has no effect if parameters other than the
above are used.
RWER T
249