Drpa - Draw To Relative Position Specified By Angle; Drpa Draw To Relative Position Specified By Angle; Function - Kyocera DP-1800 Command Reference Manual

PRESCRIBE Command Reference
DRPA —
Format
Parameters
length:
angle:

Function

File
82
Draw to Relative Position specified by
Angle
DRPA length, angle;
length of the line
angle in degrees, measured clockwise from the vertical
The DRPA command draws a line of a specified length at a specified angle, starting from
the current cursor position, with the thickness designated by the SPD command.
This command is ignored if placed within a path.
!R! RES; UNIT C;
MAP 2, 11;
DRPA 2, 72;
DRPA 2, 0;
DRPA 2, 144;
DRPA 2, 72;
DRPA 2, 216;
DRPA 2, 144;
DRPA 2, 288;
DRPA 2, 216;
DRPA 2, 0;
DRPA 2, 288;
PAGE;
EXIT;