Pcrp - In Path, Curve To Relative Position - Kyocera DP-1800 Command Reference Manual

PRESCRIBE Command Reference
PCRP —
Format
Parameters
x1, y1:
x2, y2:
x3, y3:
Function
186
in Path, Curve to Relative Position
PCRP x1, y1, x2, y2, x3, y3;
coordinates of the first control point as measured from the current cursor position
coordinates of the second control point as measured from the current cursor position
coordinates of the end point as measured from the current cursor position
The PCRP command adds a Bézier curve segment to the path, starting from the current
cursor point, referred to as current position as shown at right, through two control points
of (x1, y1) and (x2, y2), and ending at (x3, y3).
Example:
NEWP;
PMZP 5, 10;
PCRP 2.5, -4, 7, -5, 7, 0;
STRK;