Emcr - Enable Macro Depending On Paper Source - Kyocera DP-1800 Command Reference Manual

EMCR —
Format
Parameters
mode:
paper-source:
print-side:
repeat-count:
macro-name:
parameter:
Enable MaCRo depending on paper
source
EMCR mode, paper-source [ = print-side], [repeat-count] macro-name
[, parameter...];
E = enable automatic macro
D = disable automatic macro
0 = multi-purpose feeder
1 = cassette 1 (printing system's cassette)
2 = cassette 2
3 = cassette 3
4 = cassette 4
5 = cassette 5
6 = cassette 6 (bottom)
99 = envelope or universal feeder
side of the page the macro is executed when duplex-printing
0 = front
1 = back
number of times the macro is executed
name defined by the MCRO command
values given to the dummy parameters in the macro definition
EMCR
89