Altf - Change To Alternate Font; Altf Change To Alternate Font - Kyocera DP-1800 Command Reference Manual

ALTF —
change to ALTernate Font
Format
Parameter
Function
ALTF alternate-number;
alternate-number: a number from 0 to 47
The ALTF command changes the current font to a font designated by an alternate
number. The actual font assigned to this alternate number is set by a previous SETF
command.
The alternate number can be a bitmap font number or a number specifically assigned to
the scalable font using the SFNT command (See File on the next page).
If no font has been assigned to the specified alternate number, the ALTF command has
no effect: the font does not change.
The ALTF command enables you to prepare a document using several fonts, without
deciding in advance which specific fonts to use. For example, you could use ALTF 1 to
designate plain text and ALTF 2 to designate italics, and allow the specific size and style
of type to be determined by SETF commands at a later time.
ALTF
23