Srm - Set Right Margin - Kyocera DP-1800 Command Reference Manual

PRESCRIBE Command Reference
SRM —
Set Right Margin
Format
Parameter
width:
Function
File
328
SRM width;
size of right margin
The SRM command sets the right margin, as measured from the left edge limit of the
paper in the unit value designated by the UNIT command.
If an attempt is made to print beyond the right margin, the characters are printed on the
next line in the IBM and Epson emulation modes and discarded in the other emulations.
The SPW (Set Page Width) command also sets the right margin, but it measures from the
left margin position.
!R! RES; UNIT C; SLM 1;
CMNT Emulation mode is 1 (IBM);
SFNT "Univers-MdCd", 18; SLPI 4;
SRM 11;
EXIT;
Line with 1-cm left margin and 11-cm right margin
!R! SRM 9; EXIT;
Line with 1-cm left margin and 9-cm right margin
!R! SRM 7; EXIT;
Line with 1-cm left margin and 7-cm right margin
!R! PAGE; EXIT;