Str - Set Dot Resolution - Kyocera DP-1800 Command Reference Manual

STR —
SeT dot Resolution
Format
Parameter
dot-resolution:
Function
75 dpi resolution
100 dpi resolution
(Default)
STR dot-resolution;
75, 100, 150, 200, 300, 600, or 1200
The STR command sets the dot resolution for raster graphics to 75, 100, 150, 200, 300,
600, or 1200 dots per inch. The 200, 600, and 1200 dpi resolutions are available only for
the printing system models that support the 600 or 1200 dpi printing resolution. The
default value is 75 dots per inch.
The STR command affects only PRESCRIBE raster graphics. It does not change the
resolution of vector graphics commands or HP LaserJet raster graphics.
The following diagrams show examples of printing a raster graphics data using different
dot resolution.
150 dpi resolution
200 dpi resolution 300 dpi resolution
600 dpi resolution 1200 dpi resolution
STR
343