Lapi - Load Api Program - Kyocera DP-1800 Command Reference Manual

PRESCRIBE Command Reference
LAPI —
LoaD API Program
Format
Parameters
Program type:
PRESCRIBE command name:
Function name:
Function
146
LAPI Program type, PRESCRIBE command, function name;
Type of the downloading program
"PRE" PRESCRIBE command
Name of the PRESCRIBE command to be stored
Alphanumeric string of 2 to 4 characters
(Only in the case of "PRE")
Name of the function that starts the user program
(Only in the case of "PRE")
Up to 31 characters
The LAPI command downloads the API program.
As described in the example below, add the string "WRED" to the end of the
downloading data as a terminator.
It is possible to add a string other than "WRED." It is because if the downloading
program includes the string "WRED," this must be changed. To change the terminator,
use the RWRF T command.
When storing a new PRESCRIBE command, if the specified command name has already
been stored, the sending data will be invalid.
Data downloaded with the LAPI command will be deleted (invalid) upon the system
restart.
Example:
!R! LAPI "PRE" , "XXXX" , "XXXXXXXX" ;[Program Data]WRED;
EXIT;
After "WRED" is changed to "TEST"
!R! LAPI "PRE" , "XXXX" , "XXXXXXXX" ;[Program Data]TEST;
EXIT;