Asfn - Assign External Characters For Font; Asfn Assign External Characters For Font - Kyocera DP-1800 Command Reference Manual

ASFN —
Format
Parameters
mode:
font-number:
Function
ASsign external characters for FoNt
ASFN mode, font-number;
A = assign external characters
R = release external characters
number identifying the external character font: 1000 to 65535
The ASFN command assigns external characters which are defined by the user to the
current resident font. The external characters should be generated and downloaded in the
printing system as an external font by using the LDFC or LDFN command.
For the print systems supporting 2-byte font system, if the user-defined font is a 1-byte
code font, it is assigned to the current resident roman (ANK) font. If it is a 2-byte code
font, it is assigned to the current 2-byte font.
This command has no effect if the resident font is a bitmap font and the font to be
assigned is an outline font, or vice versa.
mode = R is used to release the current resident font from the external characters. Note
that it is necessary to release the external font assignment if you want to delete the
external font.
ASFN
31