Safety Notes - Xerox XC23 User Manual

Safety notes

Your copier and supplies meet strict safety requirements. These requirements include safety
agency examination and approval and compliance to any established environmental standards.
Please read the following instructions carefully before operating the copier, and refer to these
instructions, as required, in order to ensure the continued safe operation of your copier.
Follow all the warnings and instructions which are marked on or supplied with the product.
Unplug the copier from the wall outlet before cleaning it. Always use the materials which are
specifically designated for the copier. Use of any other materials may result in poor performance
and may create a hazardous situation.
Do not use aerosol cleaners. Follow the instructions in this user guide for the proper cleaning
methods.
Never use any supplies or cleaning materials for purposes other than what they are intended. Keep
all supplies and materials out of the reach of children.
Do not use the copier near water, wet locations, or outdoors.
Do not place the copier on an unstable cart, stand, or table. The copier may fall, and thereby cause
personal injury or serious damage to the copier.
This product is equipped with a three-wire, grounding-type plug (in other words, a plug having a
third grounding pin). This plug fits into a grounding-type power outlet only. This is a safety feature.
If you cannot insert the plug into the outlet, contact your electrician in order to replace the
receptacle; this ensures that you will avoid the risk of electric shock. Never use a ground adapter
plug to connect the copier to a power source receptacle which lacks a ground connection terminal.
This copier should be operated from the type of power source which is indicated on the marking
label. If you are uncertain as to the available power type, consult your local power company.
Do not allow anything to rest on the power cord. Do not locate the copier where persons will step
on the cord.
The power supply cord is the disconnect device for this equipment. Ensure that the installation of
the copier is near the outlet and that the outlet is easily accessible.
Your copier is equipped with an energy saving device which conserves power when the copier is
not in use. The copier may be left on continuously.
Slots and openings in the copier cabinet provide ventilation; these slots and openings are located
in the back and the sides of the copier cabinet. In order to ensure the reliable operation of the
copier and to protect it from overheating, these openings must not be blocked or covered. Do not
place the copier near or over a radiator or heat register. Do not place the copier in a built-in
installation unless proper ventilation is provided.
XC23/XC33/XC33D User Guide
Safety notes
1