Safety Notes - Xerox DocuColor DocuColor 4 Setup Manual

Read this section carefully to ensure that you operate your machine safely.
This section describes the graphic symbols used throughout the guide.
WARNING
CAUTION
This symbol is used to alert operators to a specific op-
erating procedure that requires close attention. Read and
follow instructions carefully.
This symbol is used to alert operators to a specific oper-
ating procedure that must not be performed. Read and fol-
low instructions carefully.
This symbol is used to alert operators to a specific oper-
ating procedure that should be emphasised for operating
safety. Read instructions carefully before performing the
required procedure.
Installations and relocation
Do not place the machine in a hot, humid, dusty, or poorly ventilated environ-
ment. Prolonged exposure to these adverse conditions can cause a fire or
shock hazard.
Do not place the machine near heaters or volatile, flammable, or combustible
materials such as curtains that may catch fire.
xvi

Safety Notes

is used to alert operators to an operating procedure, practice or
condition that, if not strictly observed may result in severe injury or
loss of life.
is used to alert operators to an operating procedure, practice, or
condition that if not strictly observed, might result in safety hazards to
personnel or damage to equipment.
Heated
Flam- Electric
surface
mable shock
No fire Do not
Prohibited
disas-
semble
Unplug
Instructions
Ground
Earth
Pinched
fingers
Do not
touch