Table of Contents
Advertisement
CLI Commands for 802.1x Authentication – Use the 802.1x
supported command from the global configuration mode to
enable 802.1x authentication. Set the session and broadcast key
refresh rate, and the re-authentication timeout. To display the
current settings, use the show authentication command from
the Exec mode.
SMC-AP(config)#802.1x supported
SMC-AP(config)#802.1x broadcast-key-refresh-rate 5
SMC-AP(config)#802.1x session-key-refresh-rate 5
SMC-AP(config)#802.1x session-timeout 300
SMC-AP(config)#exit
SMC-AP#show authentication
Authentication Information
=========================================================
MAC Authentication Server
MAC Auth Session Timeout Value : 300 secs
802.1x
Broadcast Key Refresh Rate
Session Key Refresh Rate
802.1x Session Timeout Value
Address Filtering
System Default : DENY addresses not found in filter table.
Filter Table
MAC Address
-----------------
00-70-50-cc-99-1a
00-70-50-cc-99-1b
=========================================================
SMC-AP#
Advanced Configuration
: REMOTE
: SUPPORTED
: 5 min
: 5 min
: 300 secs
: DENIED
Status
----------
DENIED
ALLOWED
6-51
6-52
6-53
6-54
6-59
5-19
Advertisement
Table of Contents
