SMC Networks 2552W-G User Manual page 59

CLI Commands for System Identification – Enter the global
configuration mode, and use the system name command to
specify a new system name. Enter the wireless configuration
mode (11g), and use the ssid command to set the service set
identifier. Then return to the Exec mode, and use the show
system command to display the changes to the system
identification settings.
SMC AP#configure
SMC-AP(config)#system name R&D
SMC-AP(config)#interface wireless g
SMC-AP(if-wireless g)#ssid r&d
SMC-AP(if-wireless g)#end
SMC-AP#show system
System Information
===================================================
Serial Number
System Up time
System Name
System Location
System Contact
System Country Code : US - UNITED STATES
MAC Address
IP Address
Subnet Mask
Default Gateway
VLAN State
Native VLAN ID
IAPP State
DHCP Client
HTTP Server
HTTP Server Port
Slot Status
Software Version
===================================================
SMC-AP#
: A324003220
: 0 days, 0 hours, 32 minutes, 51 seconds
: r&d
:
: Contact
: 00-30-F1-91-91-5B
: 192.168.2.51
: 255.255.255.0
: 192.168.2.250
: DISABLED
: 1
: ENABLED
: ENABLED
: ENABLED
: 80
: Band(g)
: v2.0.22
Advanced Configuration
6-11
6-20
6-68
6-78
6-12
6-33
5-5