show interface wireless
This command displays the status for the wireless interface.
Syntax
show interface wireless <g>
• g - 802.11g radio interface.
Command Mode
Exec
Example
SMC-AP#show interface wireless g
Wireless Interface Information
=========================================================
----------------Identification---------------------------
Description
SSID
Channel
Status
----------------802.11 Parameters------------------------
Transmit Power
Max Station Data Rate
Fragmentation Threshold
RTS Threshold
Beacon Interval
DTIM Interval
Maximum Association
----------------Security---------------------------------
SSID Broadcast
Multicast cipher
Unicast cipher
WPA clients
Encryption
Default Transmit Key
Static Keys :
Key 2: EMPTY
Authentication Type
=========================================================
SMC-AP#
: Enterprise 802.11g Access Point
: SMC-AP
: 0 (AUTO)
: Disable
: HALF (10 dBm)
: 54Mbps
: 2346 bytes
: 2347 bytes
: 100 TUs
: 2 beacons
: 32 stations
: DISABLED
: TKIP
: WEP
: SUPPORTED
: DISABLED
: 1
Key 3: EMPTY
: OPEN
Interface Commands
Key 4: EMPTY
6-95