Command Line Interface
interface
This command configures an interface type and enters interface
configuration mode.
Syntax
interface <ethernet | wireless <g>>
• ethernet - Interface for wired network.
• wireless - Interface for wireless clients.
• g - 802.11g radio interface.
Default Setting
None
Command Mode
Global Configuration
Example
To specify the 10/100Base-TX network interface, enter the
following command:
SMC-AP(config)#interface ethernet
SMC-AP(if-ethernet)#
dns server
This command specifies the address for the primary or secondary
domain name server to be used for name-to-address resolution.
Syntax
dns primary-server <server-address>
dns secondary-server <server-address>
• primary-server - Primary server used for name resolution.
• secondary-server - Secondary server used for name
resolution.
• server-address - IP address of domain-name server.
6-68